David payne is a well known australian boat designer who has a myriad of traditional or contemporary boat designs and stock plans. designs are for a range of boats including plywood, clinker or lapstrake and strip plank boats. david's stock plans include dinghy plans, rowing skiff plans, kayak plans, sailing yacht plans, trailer sailor plans. Boat plans. we sell plans of most of the boats that we have designed. we can also design a boat for you if what you want isn’t already here. our designs range from 9′ clinker dinghies to 200 ton schooners and everything in between.. Clinker built (also known as lapstrake) is a method of boat building where the edges of hull planks overlap each other. where necessary in larger craft, shorter planks can be joined end to end into a longer strake or hull plank. the technique developed in northern europe and was successfully used by the anglo-saxons, frisians, scandinavians, and typical for the hanseatic cog..
The boat is suitable for any manner of pleasure use, and although not fast, it is a safe and stable little craft and a beautiful shape. lines plans and specification table are in the stock plan catalog. stern post detail. normally clinker boats are planked up over temporary molds with the frames fitted later.. Boats designed by gavin atkin – the barton skiff, a low powered outboard skiff – get the plans here. the barton skiff – click on the thumbnail for a larger drawing. brian king’s barton skiff during construction: see a short video of brian’s boat in action using a 3.5hp outboard at 6knots or so. note the near complete lack of wake, which should indicate that the boat’s working. I just finished building an oughtred caledonia yawl - clinker built but uses epoxy instead of copper roved nails, which i have also worked with. i am looking for a good small stable dinghy design to build next. this looks very much like what i am looking to build. is it still possible to get some more information on this boat like offsets or plans?.
0 komentar:
Posting Komentar